Fish Meal Iron Detector (manual-removal)

Basic Info:

   The new pellet feed machinery can conveniently process powder feed into pellet feed. Using lighting electricity as the power, the pellets are pressed out of the die hole under the squeeze of the pressing roller, and the length of the pellets can be easily adjusted. The structure is simple, the floor space is small, the noise is low, and the use is convenient.

Main Features:

1. Our fish feed extruder is of single screw design.
2. The pellets extruded from pellet mill is about 80℃ and moisture content is 18%-20%, so you should equip a dryer and cooler if the capacity is more than 500kg/h. While for small capacity, you can complete the drying and cooling with a cooler.
3. We provide technical formula for making floating fish feed pellets after placing order.
4. We send extra easy wear parts for free including two sleeves, one screw, one cutting knife and three die mould.

Our Service:
1)Provide factory layout according to your factory size in advance;
2)Provide the basic formula;
3)Inspect the machine before leaving the factory;Oversea installation and commissioning equipment;
4)Technician will work with your workers together and teach your workers how to install machines, 
    how to operate machines, how to maintain machines during daily working;
5)Our engineers will teach your workers how to clean the extruder, how to change the screw, 
   how to change barrel etc, and provide technology support with you forever;
6)Provide English Version of Installation / Operation / Service / Maintenance Manual.